Evenflo LiteMax DLX vs UPPAbaby Mesa V2
Side-by-side specs from each maker.
UPPAbaby Mesa V2List price not published
Only the differences are shown.
| Evenflo LiteMax DLX | UPPAbaby Mesa V2 | |
|---|---|---|
| Type | Infant car seat | Infant car seat |
| Rear-facing weight | 4–35 lb | 4–35 lb |
| Rear-facing height | Up to 32 in | Up to 32 in |
| Seat weight | 9 lb | Not listed |
| Head rule | Not listed | Minimum 1" (2.5 cm) gap between the child's head and top of headrest (manual) |
| Base included | Not listed | Yes |
| Newborn insert | Not listed | Infant Insert designed for children who weigh 4-11 lbs (manual) |
| Installation | LATCH, bubble level included | Not listed |
| Load leg | Yes | No |
| Handle in the car | Not listed | Manual: 'The carry handle must be locked in the (4th) rebound position when in use.' |
| Aircraft label | Not listed | Certified for aircraft, per the maker |
| Expires after | Not listed | 7 years |
Evenflo LiteMax DLX
A lightweight rear-facing-only infant carrier from Evenflo's LiteMax line, shown with a SafeZone load leg base. Evenflo lists it for 4-35 lb and up to 32 in.
- 35 lb weight limit gives more rear-facing time than 30 lb seats
- Carrier is about 9 lb
- Evenflo's page leaves out width, harness positions, expiration and price
Ask the meadow
LiteMax DLX or Mesa V2?
Answers come from each maker's published specs. Safety and health questions link to the agency or medical source.
Which is easier to travel with?
LiteMax DLX: 9 lb. Mesa V2: certified for planes.
Still wondering? Write to us at hello@cribpicks.com and we'll look it up.