Graco SnugRide SnugFit LX vs Nuna PIPA urbn
Side-by-side specs from each maker.
Only the differences are shown.
| Graco SnugRide SnugFit LX | Nuna PIPA urbn | |
|---|---|---|
| Type | Infant car seat | Infant car seat |
| Rear-facing weight | 4–30 lb | 4–30 lb |
| Rear-facing height | Up to 30 in | 16–29 in |
| Seat weight | 9 lb | 7 lbLightest |
| Base weight | 7.4 lb | Not listed |
| Width | 17.5 in | 17.5 in |
| Head rule | Top of Head MUST BE AT LEAST 1" (2.5 cm) BELOW the Top of the Car Seat | Top of child's head should be at least 1 inch below top of child restraint. |
| Base included | Not listed | No |
| Newborn insert | Body support (accessory on select models): 'The body support can ONLY be used for infants 12 lb (5 kg) or less.' Buckle can be shortened for low birth weight infants (minimum weight 4 lb). | Infant head support and body inserts (Flex System page); removal limit not stated |
| Installation | SnugLock technology with vehicle seat belt, LATCH (InRight LATCH) | baseless (pipaFIX rigid latch), seat belt (European belt path) |
| Load leg | Not listed | No |
| Anti-rebound bar | Yes | Not listed |
| Rotates | Not listed | No |
| Recline positions | 5 | Not listed |
| Works with strollers | Graco strollers (attaches with a one-step secure connection) | Nuna SWIV and TRIV bassinets, Flex stroller seat, and PIPA series seats via folding ring adapter; not compatible with PIPA series or RELX ba |
| Handle in the car | Handle Has 4 Positions (A-D). 'Carry handle MUST be upright in position A when carrying. Handle can be in any position when used in the vehicle.' | Manual: 'The carrier handle can be adjusted to 3 positions.' 'Handle can be used in vehicle in any locked position.' |
| Aircraft label | Certified for aircraft, per the maker | Certified for aircraft, per the maker |
| No added flame retardants | Not listed | Yes |
| Expires after | 7 years | Not listed |
Graco SnugRide SnugFit LX
Rear-facing-only infant seat from Graco with SnugLock installation, an anti-rebound bar and an adjustable base.
- Maker lists 5 base recline positions
- Installs by vehicle seat belt or LATCH
- Maker lists an anti-rebound bar
- Manual PDF not opened
Nuna PIPA urbn
A baseless Nuna carrier that installs with built-in rigid latch connectors or the seat belt, aimed at city use and rides in other people's cars.
- Installs without a separate base
- About 7 lb carrier
- FAA certified for aircraft use
- No base means no load leg or recline foot adjustments from a base
- 30 lb and 29 in maximum, a bit lower height than other infant seats
Ask the meadow
SnugRide SnugFit LX or PIPA urbn?
Answers come from each maker's published specs. Safety and health questions link to the agency or medical source.
Which is easier to travel with?
SnugRide SnugFit LX: certified for planes, 9 lb. PIPA urbn: certified for planes, installs without a base, 7 lb.
Still wondering? Write to us at hello@cribpicks.com and we'll look it up.